a mullion-transom wall system used to design and construct lightweight fire-rated curtain walls conforming to the EI30 and EI60 fire resistance class
the system is based on a framed load-bearing structure consisting of vertical (mullion) and horizontal (transom) aluminium shaped sections with a width of 55 mm.
in order to obtain fire resistance of aluminium shaped sections, the mullions and transoms are fitted with special flame-retardant inserts (aluminium shaped sections filled with a flame-retardant compound)
the appearance of the fire-rated facade is the same as the appearance of the mullion-transom facade; therefore, the joint of the fire-rated facade and the standard facade can be optically invisible
efficient fire protection of the systems offered by Aliplast is not compromised by appearance; the solutions offered by Aliplast provide maximum safety and freedom of architectural design at the same time
a wide range of decorative cover caps makes is used to obtain a modern and individual design of the facade
a wide range of colours – RAL palette (Qualicoat 1518), texture colours, Aliplast Wood Colour Effect (wood-like colours), Aliplast Loft View – colours imitating stone surfaces (Qualideco PL-0001), anodised colour (Qualanod 1808), bi-colour

Show

RAL

Wood Colour

Bicolor

Anode

TECHNICAL SPECIFICATION

SYSTEM	MATERIAL	DEPTH MULLION	DEPTH TRANSOM	GLAZING RANGE	MULLIONS RIGIDITY	TRANSOM RIGIDITY
MC FIRE	aluminium	10-326 mm	10-294 mm	4-59 mm	111,7 - 4092 cm4*	131,7-2293 cm4*

*There is a possibility to use additional reinforcements

PERFORMANCE

SYSTEM	THERMAL INSULATION UF*	AIR PERMEABILITY	WINDLOAD RESISTANCE	WATERTIGHTNESS
MC FIRE	Uf from 1,03 W/m2K	Class AE1300; EN 12152	1500 - 2600 Pa; EN 13116	Class RE1500; EN 12154